Mohammad Aamir is very good
young talented player for pakistan team.He debuted his career in T20 world cup
2009.He is young experienced left handed bowler.Pakistan found the best bowler
like wasim akram.He had made many records in short time.He had take 5 wickets
and deliver maiden over and made world record.Last few days he is displaying
the better batting performance.He had made 72 runs vs newzealand.Pakistan won
the t20 world cup from his help.He had many world records against every
team.Now he is on 9th number in icc bowling ranking.He was the
future of Pakistan cricket team.He was one the best bowlers.Last few days he is
included in spot fixing.May he come early in Pakistan cricket team (Ameen).
Mohammad Asif is very good talented player for pakistan team.He debuted his career in 2007.He is
experienced right handed bowler.Pakistan found the best bowler .He had made
many records in short time.Last few days he is displaying the better batting performance.Pakistan
won.He had many world records against every team.Now he is on 11th
number in icc bowling ranking.He was the future of Pakistan cricket team.He was
one the best bowlers.Last few days he is included in spot fixing.May he come
early in Pakistan cricket team (Ameen).
This match had been
played between Pakistan and South Africa in Abu Dhabi on October 31 2010.South
Africa had won the toss and chose to bat.South Africa had made 286 runs in 50
overs.So,target to Pakistan was 287 in 50 overs.Pakistani openers was Mohammad
Hafeez and Asad Shafiq.Pakistan lost his first wicket in just 3rd
over on 8 runs.So,preasure was released on Pakistan team.Second wicket was fell
down of younis khan.3rd wicket fell down of misbah-ul-haq.4th
wicket fell down of Mohammad Hafeez.5th wicket fell down of Shahid
afridi after hitting 2 sixes.Now Abdul Razzaq came.He played unbelievable
inning.He made 109* runs in just 72 balls.So,Pakistan had won this match by
Abdul Razzaq’s performance.Man of the match was awarded to Abdul Razzaq.
The umpires signal various events with gestures, as follows:
Out:
When a batsman is out, the umpire making the decision raises one hand above his head, with the index finger extended.
Not Out:
There is no formal signal to indicate that a batsman is not out. The umpire can either shake his head 'no' or not signal at all.
Four:
A four scored by the ball reaching the boundary is signalled by an arm extended horizontally and waved briefly back and forth in a horizontal arc.
Six:
A six is signalled by raising both arms straight over the head.
No Ball:
A no ball is signalled by holding an arm out horizontally.
Wide:
A wide is signalled by holding both arms out horizontally.
Byes:
Runs scored as byes are signalled by raising one arm over the head, palm open.
Leg Byes:
Leg byes are signalled by raising one leg and tapping the knee with one hand.
Dead Ball:
If the umpire has to signal dead ball to prevent the players from assuming that the ball is still alive, he waves both arms across each other in front of his abdomen.
One Short:
One short is signalled by touching the tip of one hand to the same shoulder.
TV Replay:
If an umpire wishes the third umpire to make a decision based on a TV replay, he signals by drawing a large square shape in the air with both hands, spreading them out high in the air in front of him, bringing them down, and then together again.
Play is suspended at the umpires' discretion for rain. Light rain is usually tolerated, though nothing heavier, because of the possibility of damage to the pitch. If the players are off the field, they must remain off until the rain has stopped completely. During rain the pitch is covered with waterproof material to protect it. Often the bowlers' run-ups and an area around the pitch are also covered.
During very windy conditions, sometimes the bails will tend to blow off the top of the stumps. If this becomes a problem, the umpires can decide to play without bails. In this case, the wicket does not need to be broken by uprooting a stump, and the umpires must take full responsibility for deciding, in a reasonable manner, whether the wicket is broken or not.
In case of injury, substitutes may replace any number of fielders. A substitute may only field - he may not bowl, nor bat. A substitute may not keep wicket. A substituted player must return to the field as soon as he is able to resume playing without danger.
If a batsman is injured, he may retire and resume his innings when fit again, so long as his team's innings is not over. If a batsman is too injured to bat when no other batsmen remain to come in after a wicket falls, his innings must be forfeited and his team's innings ends. If a batsman is able to bat, but not run, then another player may run for him. The runner must wear the same equipment as the batter, and performs all his running. The injured non-runner must remain behind his crease at all times when the ball is in play or risk being run out, even if his runner is safely behind a crease.
If a bowler is injured during an over and cannot complete it, another bowler must bowl the remaining deliveries in that over. The bowler chosen to finish the over must not be the bowler who bowled the previous over, and must not bowl the over immediately following either.
A player may not leave the field for injury unless the injury is sustained on the field. An injured player who takes the field may not leave because of his pre-existing injury, unless it is clearly aggravated further on the field.
Field placements in cricket are not standardised. There are several named field positions, and the fielding captain uses different combinations of them for tactical reasons. There are also further descriptive words to specify variations on the positions labelled by simple names, so that any position in which a fielder stands can be described.
The following diagram shows the rough positions of all of the simply named field positions. In this diagram, the pitch is indicated by three '#' marks; the striker's end is at the top. The bowler is not shown, but would be running upwards towards the bottom end of the pitch. The approximate field positions are marked with numbers or letters, according to the key on the right of the diagram. The three marks: '+', '*', and '~' indicate that the adjective shown at the bottom of the list can be used to describe a modification of that position, as shown in the example.
---------------------------------1wicket keeper
/\2first slip
/eh\3second slip
/\4third slip
/\5gully +
/\6point +*~
/\7cover +
/2j\8extra cover +
|43 1d| 9mid-off +*
|5| amid-on +*
|6# ic| bmid-wicket +
|#| csquare leg +~
|7#b| dleg slip
|8| ethird man
|| flong off
\9a/glong on
\/hfine leg
\ /ibat-pad
\/ +deep (near boundary)
\/*silly (near batsman)
\fg/~backward (more 'up')
\/eg.
---------------------------------jdeep backward square leg
(This picture will be replaced with an inline image when I have time.)
Other modifiers used to qualify positions:
square: close to a line perpendicular to the pitch, through the batsman;
fine: close to a line straight along the pitch;
short: close to the batsman.
The only restriction on field placements is that, at the time the ball is delivered, there must be no more than two fielders in the quadrant of the field backward of square leg. (This rule exists mainly for historical reasons - see the Bodyline section below.)
Sometimes fielders close to the bat wear helmets for safety. When not in use, the helmet (or any other loose equipment) may be placed on the field (usually behind the wicket-keeper, where it is unlikely to be hit by the ball). If any such loose fielding equipment is hit with the ball, five runs are scored, either to the batsman who hit the ball or as the appropriate form of byes. The ball is then considered dead and no further runs can be taken, nor can a batsman be run out.
If a fielder is wearing a protective helmet, and the striker hits the ball so that it bounces off the helmet, he may not be out caught off the rebound. If a ball rebounds from any other part of the body of a fielder, he may be out caught if another fielder (or the same one) then catches the ball before it hits the ground.
The bowling action itself has to conform to several restrictions. The bowler's arm must be straight when the ball is bowled (so no "throwing" is allowed). The ball must be bowled overarm, not underarm.
The difference between 'bowling' and 'throwing': When you throw the ball, the elbow is cocked and used to impart energy to the ball by straightening. When a ball is bowled, the elbow joint is held extended throughout. All the energy is imparted by rotation of the arm about the shoulder, and possibly a little by wrist motion. For a right-handed bowler, the action goes roughly as follows:
After the run-up, the right foot is planted on the ground with the instep facing the batsman. The right arm is extended backwards and down at this stage. The left foot comes down on the popping crease as the bowler's momentum carries him forward - he is standing essentially left-side on to the batsman. As the weight transfers to the left foot, the right arm is brought over the shoulder in a vertical arc. The ball is released near the top of the arc, and the follow-through brings the arm down and the right shoulder forward rapidly.
Bouncing the ball on the pitch is not mandatory. It's usually done because the movement of the ball off the pitch makes it much harder to hit. Unbounced deliveries, or full tosses are almost always much easier to hit, and mostly they are bowled accidentally. A full toss above hip height is no ball, and an umpire who suspects that such a ball was deliberate will give the bowler an official warning. A warning is also given if the umpire believes the bowler is bowling at the body of a batsman in a deliberate attempt to injure the batsman. After two warnings a bowler is barred from bowling for the rest of the innings.
If any rule governing the bowling action is violated, a no ball results.
Bowlers are allowed to polish the ball by rubbing it with cloth (usually on their trouser legs) and applying saliva or sweat to it. Any other substance is illegal, as is rubbing the ball on the ground. Usually one side of the ball is polished smooth, while the other wears, so that the bowler can achieve swing (curving the ball through the air). It is also illegal to roughen the ball by any means, including scraping it with the fingernails or lifting the seam. A bowler who illegaly tampers with the ball is immediately suspended from bowling for the rest of that innings.
The bowler may bowl from either side of the wicket, but must inform the umpire and the batsmen if he wishes to change sides. Bowling with the bowling arm closest to the wicket is called over the wicket, and is most common. Bowling with the non-bowling are closest to the wicket is called around the wicket.
The bowler may abort his run-up or not let go of the ball if he loses his footing or timing for any reason. The umpire will signal dead ball and the ball must be bowled again. If a bowler loses his grip on the ball during the delivery action, it is considered to be a live ball only if it is propelled forward of the bowler. If such a ball comes to rest in front of the striker, but any distance to the side, the striker is entitled to walk up to the ball and attempt to hit it with his bat. The fielding team must not touch the ball until the striker either hits it or declines to do so.
A delivery may also be aborted by the striker stepping away from his stumps, if distracted by an insect or dust in the eye, for example.
Extras are runs scored by means other than when the ball is hit by a batsman. Extras are not credited to any batsman, and are recorded by the scorer separately. The total number of runs for the innings is equal to the sums of the individual batsmen's scores and the extras. There are four types of extras: no balls, wides, byes, and leg byes.
The bowler must bowl each ball with part of his frontmost foot behind the popping crease. If he oversteps this mark, he has bowled a no ball. The umpire at that end calls "no ball" immediately in a loud voice. The batsman may play and score runs as usual, and may not be out by any means except run out, handle the ball, hit the ball twice, or obstructing the field. Further, if the batsman does not score any runs from the ball, one run is added to the batting team's score. Also, the bowler must bowl an extra ball in his over to compensate. A no ball is also called if any part of the bowler's back foot is not within the area between the return creases.
If the bowler bowls the ball far to one side or over the head of the batsman, so making it impossible to score, the umpire will signal the ball as a wide . This gives the batting team one run and the bowler must rebowl the ball. The striker may not be out hit wicket off a wide ball.
If the striker misses a ball and the wicket-keeper fails to gather it cleanly, the batsmen may take runs. These runs are called byes and are scored as extras.
If the striker, in attempting to play a shot, deflects the ball with part of his body, the batsmen may attempt to take a run. Such runs are called leg byes . If the striker did not attempt to play a shot with his bat, leg byes may not be taken. The umpire adjudicates by signalling a dead ball if the batsmen attempt to run when, in his opinion, no attempt was made to play a shot.
Batsmen may be run out as usual while running byes and leg-byes. If, while running either form of bye, the ball reaches the boundary, four byes (of the appropriate type) are scored.
The game is adjudicated by two umpires, who make all decisions on the field and whose word is absolutely final. One umpire stands behind the non-striker's wicket, ready to make judgements on LBWs and other events requiring a decision. The other umpire stands in line with the striker's popping crease, about 20 metres (20 yards) to one side (usually the leg side, but not always), ready to judge stumpings and run-outs at his end. The umpires remain at their respective ends of the pitch, thus swapping roles every over.
If the technology is available for a given match, a third umpire is sometimes used. He sits off the field, with a television replay monitor. If an on-field umpire is unsure of a decision concerning either a run out or a stumping attempt, he may signal for the third umpire to view a television replay. The third umpire views a replay, in slow motion if necessary, until he either reaches a decision or decides that he cannot make a clear decision. He signals the result to the on-field umpire, who must then abide by it. If the equipment fails, the replay umpire signals no decision. The replay umpire cannot be used for any decisions other than run outs and stumpings.
Whenever any decision is in doubt, the umpire must rule in favour of the batsman.
If the ball hits an umpire, it is still live and play continues. If it lodges in an umpire's clothing, then it is dead.
The game is also presided over by a match referee, who watches from outside the field. The referee makes no decisions of relevance to the outcome of the game, but determines penalties for breaches of various rules and misconduct. In professional games, these penalties are monetary fines.
Arguing with an umpire's decision is simply not tolerated. Anything more than a polite question to the umpires is heavily frowned upon and could attract a penalty from the referee. The most serious misconduct in a cricket match is of the order of a rude gesture to an opponent or throwing the ball into the ground in disgust. Such gross misbehaviour would attract large fines and possibly match suspensions. Penalties for physical violence can only be guessed at, but would possibly be a career suspension.
Here is a full list of the ten different ways of getting out. But first, a few necessary definitions:
The wicket is said to be broken if one or both of the bails have been dislodged and fallen to the ground. If the bails have fallen off for any reason and the ball is still in play, then breaking the wicket must be accomplished by pulling a stump completely out of the ground. If the wicket needs to be broken like this with the ball, the uprooting of the stump must be done with the ball in contact with the stump.
The field is notionally split into two halves, along a line down the centre of the pitch. The half of the field in front of the striker is called the off side, the half behind is called the leg side, or sometimes the on side. Thus, standing at the bowler's wicket and looking towards a right-handed striker's wicket, the off side is to the left and the leg side to the right (and vice-versa for a left-handed striker). The stumps of the striker's wicket are called off stump, middle stump, and leg stump, depending on which side they are on.
When a batsman gets out, no matter by what method, his wicket is said to have fallen, and the fielding team are said to have taken a wicket.
Now, the ways of getting out:
Caught:
If a fielder catches the ball on the full after the batsman has hit it with his bat. However, if the fielder catches the ball, but either during the catch or immediately afterwards touches or steps over the boundary, then the batsman scores six runs and is not out.
Bowled:
If the batsman misses the ball and it hits and breaks the wicket directly from the bowler's delivery. The batsman is out whether or not he is behind his popping crease. He is also out bowled if the ball breaks the wicket after deflecting from his bat or body. The batsman is not out if the wicket does not break.
Leg Before Wicket:
If the batsman misses the ball with his bat, but intercepts it with part of his body when it would otherwise have hit the wicket, and provided several other conditions (described below) are satisfied. An umpire must adjudicate such a decision, and will only do so if the fielding team appeal the decision. This is a question asked of the umpire, usually of the form "How's that?" (or "Howzat?"), and usually quite enthusiastic and loud. If the ball bounces outside an imaginary line drawn straight down the pitch from the outside edge of leg stump, then the batsman cannot be out LBW, no matter whether or not the ball would have hit the stumps. If the batsman attempts to play a shot at the ball with his bat (and misses) he may only be given out LBW if the ball strikes the batsman between imaginary lines drawn down the pitch from the outside edges of leg and off stumps (ie. directly in line with the wicket). If the batsman does not attempt to play the ball with his bat, then he may be given out LBW without satisfying this condition, as long as the umpire is convinced the ball would have hit the wicket. If the ball has hit the bat before the hitting the batsman, then he cannot be given out LBW.
Stumped:
If a batsman misses the ball and in attempting to play it steps outside his crease, he is out stumped if the wicket-keeper gathers the ball and breaks the wicket with it before the batsman can ground part of his body or his bat behind his crease.
Run Out:
If a batsman is attempting to take a run, or to return to his crease after an aborted run, and a fielder breaks that batsman's wicket with the ball while he is out of the crease. The fielder may either break the wicket with a hand which holds the ball, or with the ball directly. It is possible for the non-striker to be run out if the striker hits the ball straight down the pitch towards the non-striker's wicket, and the bowler deflects the ball on to the wicket while the non-striker is out of his crease. If the ball is hit directly on to the non-striker's wicket, without being touched by a fielder, then the non-striker is not out. If the non-striker leaves his crease (in preparation to run) while the bowler is running up, the bowler may run him out without bowling the ball. Batsmen cannot be run out while the ball is dead - so they may confer in the middle of the pitch between deliveries if they desire.
Hit Wicket:
If, in attempting to hit a ball or taking off for a first run, the batsman touches and breaks the wicket. This includes with the bat or dislodged pieces of the batsman's equipment - even a helmet or spectacles!
Handle The Ball:
If a batsman touches the ball with a hand not currently holding the bat, without the permission of the fielding side. This does not include being hit on the hand by a delivery, or any other non-deliberate action.
Obstructing The Field:
If a batsman deliberately interferes with the efforts of fielders to gather the ball or effect a run out. This does not include running a path between the fielder and the wicket so that the fielder cannot throw the stumps down with the ball, which is quite legal, but does include any deliberate attempt to swat the ball away.
Hit The Ball Twice:
If a batsman hits a delivery with his bat and then deliberately hits the ball again for any reason other than to defend his wicket from being broken by the ball. If the ball is bouncing or rolling around near the stumps, the batsman is entitled to knock it away so as to avoid being bowled, but not to score runs.
Timed Out:
If a new batsman takes longer than two minutes, from the time the previous wicket falls, to appear on the field.
These methods of getting out are listed in approximate order of how commonly they occur. The first five are reasonably common, the last five quite rare. The last three methods are almost never invoked.
If a batsman is out caught, bowled, LBW, stumped, or hit wicket, then the bowler is credited with taking the wicket. No single person is credited with taking a wicket if it falls by any other method.
Whenever a batsman hits the ball during a delivery, he may score runs. A run is scored by the batsmen running between the popping creases, crossing over midway between them. When they both reach the opposite crease, one run is scored, and they may return for another run immediately. The fielding side attempts to prevent runs being scored by threatening to run out one of the batsmen.
If the batsmen are attempting to take runs, and a fielder gathers the ball and hits a wicket with it, dislodging one or both bails, while no batsman is behind that wicket's popping crease, then the nearest batsman is run out. Specifically, the batsman must have some part of his body or his bat (provided he is holding it) grounded behind (not on) the crease.
The batsmen carry their bats as they run, and turning for another run is accomplished by touching the ground beyond the crease with an outstretched bat. The batsmen do not have to run at any time they think it is unsafe - it is common to hit the ball and elect not to run.
If the batsmen run one or three (or five! rare, but possible), then they have swapped ends and their striker/non-striker roles are reversed for the next ball (unless the ball just completed is the end of an over).
In addition to scoring runs like this, if a batsman hits the ball so that it reaches the boundary fence, he scores four runs, without needing to actually run them. If a batsman hits the ball over the boundary on the full, he scores six runs. If a four or six is scored, the ball is completed and the batsmen cannot be run out. If a spectator encroaches on to the field and touches the ball, it is considered to have reached the boundary. If a fielder gathers the ball, but then steps outside or touches the boundary while still holding the ball, four runs are scored. If a fielder catches the ball on the full and, either during or immediately after the catch, steps outside or touches the boundary, six runs are scored.
The batsmen usually stop taking runs when a fielder is throwing the ball back towards the pitch area. If no fielder near the pitch gathers the ball and it continues into the outfield again, the batsmen may take more runs. Such runs are called overthrows. If the ball reaches the boundary on an overthrow, four runs are scored in addition to the runs taken before the overthrow occurred.
Runs scored by a batsman, including all overthrows, are credited to him by the scorer. The number of runs scored by each batsman is an important statistic.
If, while running multiple runs, a batsman does not touch the ground beyond the popping crease before he returns for the next run, then the umpire at that end will signal one short, and the number of runs scored is reduced by one.
The order in which the teams bat is determined by a coin toss. The captain of the side winning the toss may elect to bat or field first.
All eleven players of the fielding team go out to field, two players of the batting team go out to bat. The remainder of the batting team wait off the field for their turn to bat. Each batsman wears protective gear and carries a cricket bat.
The game progresses by the bowling of balls. The sequence of events which constitutes a ball follows:
The fielding team disperses around the field, to positions designed to stop runs being scored or to get batsmen out. One fielder is the bowler. He takes the ball and stands some distance behind one of the wickets (i.e., away from the pitch). Another fielder is the wicket-keeper, who wears a pair of webbed gloves designed for catching the ball and protective pads covering the shins. He squats behind the opposite wicket. The rest of the fielders have no special equipment - gloves to assist catching the ball are not allowed to anyone but the wicket-keeper.
One batsman stands behind each popping crease, near a wicket. The batsman farthest from the bowler is the striker, the other is the non-striker. The striker stands before his wicket, on or near the popping crease, in the batting stance. For a right-handed batsman, the feet are positioned like this:
The batsman stands with his bat held down in front of the wicket, ready to hit the ball, which will be bowled from the other end of the pitch. The batsman usually rests the lower end of the bat on the pitch and then taps the bat on the pitch a few times as "warm-up" backswings.
The non-striker simply stands behind the other popping crease, waiting to run if necessary. The bowler takes a run-up from behind the non-striker's wicket. He passes to one side of the wicket, and when he reaches the non-striker's popping crease he bowls the ball towards the striker, usually bouncing the ball once on the pitch before it reaches the striker. (The bowling action will be described in detail later.)
The striker may then attempt to hit the ball with his bat. If he misses it, the wicket-keeper will catch it and the ball is completed. If he hits it, the two batsmen may score runs (described later). When the runs are completed, the ball is also considered completed. The ball is considered to be in play from the moment the bowler begins his run-up. It remains in play until any of several conditions occur (two common ones were just described), after which it is called dead. The ball is also dead if it lodges in the striker's clothing or equipment. Once the ball is dead, it is returned to the bowler for the next delivery (another name for the bowling of a ball). Between deliveries, the batsmen may leave their creases and confer with each other.
When one bowler has completed six balls, that constitutes an over. A different member of the fielding team is given the ball and bowls the next over - from the opposite end of the pitch. The batsmen do not change ends, so the roles of striker and non-striker swap after each over. Any member of the fielding team may bowl, so long as no bowler delivers two consecutive overs. Once a bowler begins an over, he must complete it, unless injured or suspended during the over.
Another possibility during a ball is that a batsman may get out. There are ten different methods of being out - these will be described in detail later. If a batsman gets out, the ball is dead immediately, so it is impossible to get the other batsman out during the same ball. The out batsman leaves the field, and the next batsman in the team comes in to bat. The not out batsman remains on the field. The order in which batsmen come in to bat in an innings is not fixed. The batting order may be changed by the team captain at any time, and the order does not have to be the same in each innings.
When ten batsmen are out, no new batsmen remain to come in, and the innings is completed with one batsman remaining not out. The roles of the teams then swap, and the team which fielded first gets to bat through an innings. When both teams have completed the agreed number of innings, the team which has scored the most runs wins.
A cricket field is a roughly elliptical field of flat grass, ranging in size from about 90 to 150 metres (100-160 yards) across, bounded by an obvious fence or other marker. There is no fixed size or shape for the field, although large deviations from a low-eccentricity ellipse are discouraged. In the centre of the field, and usually aligned along the long axis of the ellipse, is the pitch , a carefully prepared rectangle of closely mown and rolled grass over hard packed earth. It is marked with white lines, called creases, like this:
The dimensions are in centimetres (divide by 2.54 for inches).
Hard, cork and string ball, covered with leather. A bit like a baseball (in size and hardness), but the leather covering is thicker and joined in two hemispheres, not in a tennis ball pattern. The seam is thus like an equator, and the stitching is raised slightly. The circumference is between 224 and 229 millimetres (8.81 to 9.00 inches), and the ball weighs between 156 and 163 grams (5.5 to 5.75 ounces). Traditionally the ball is dyed red, with the stitching left white. Nowadays white balls are also used, for visibility in games played at night under artificial lighting.
Cricket Bat:
Blade made of willow, flat on one side, humped on the other for strength, attached to a sturdy cane handle. The blade has a maximum width of 108 millimetres (4.25 inches) and the whole bat has a maximum length of 965 millimetres (38 inches).
Wickets:
There are two wickets - wooden structures made up of a set of three stumps topped by a pair of bails. These are described below.
Stumps:
Three wooden posts, 25 millimetres (1 inch) in diameter and 813 millimetres (32 inches) high. They have have spikes extending from their bottom end and are hammered into the ground in an evenly spaced row, with the outside edges of the outermost stumps 228 millimetres (9 inches) apart. This means they are just close enough together that a cricket ball cannot pass between them.
Bails:
Two wooden crosspieces which sit in grooves atop the adjacent pairs of stumps.
A complete wicket looks like this:
Protective Gear:
Pads, gloves, helmet, etc for batsmen to wear to prevent injury when struck by the ball.
Shoes:
Leather, usually with spiked soles for grip on the grass.
Clothing:
Long pants, shirt (long or short sleeved depending on the weather), possibly a sleeveless or long-sleeved woollen pullover in cold weather. For games played with a red ball, the clothing must be white or cream. With a white ball, players usually wear uniforms in solid team colours. Add a hat or cap to keep the sun off. There are no regulations regarding identifying marks or numbers on clothing.
